Need help?Do you have a question about the Bollhoff RIVKLE P1007 and is the answer not in the manual?
General| Model | RIVKLE P1007 |
|---|---|
| Manufacturer | Bollhoff |
| Operation | Pneumatic |
| Working Pressure | 5-7 bar |
| Type | Pneumatic Riveting Tool |
The "pressure method" consists of: Spin on Insert, Upset and Spin off cycles.
Defined by lab parameters and application parameters (tensile strength).
Setting range is force to obtain good installation based on thickness.
Ensure setting parameters are strictly enforced for mechanical characteristics.
Use RIVKLE® FC340 force controller for correct force adjustment.
Control L2 or S value for correct stroke application on RIVKLE® P2005.
Specifications for RIVKLE® P2005: stroke, force, pressure, weight.
Ultra-lightweight, compact, suitable for small diameter, precision force.
Specifications for RIVKLE® P1007: stroke, force, pressure, weight.
Versatile, serial use, compatible with various diameters, ergonomic.
Specifications for RIVKLE® P2007: stroke, force, pressure, weight.
Production use, large diameters (M8-M16), well balanced.
Specifications for RIVKLE® P3007: stroke, force, pressure, weight.
Validates setting, error reporting, teaching mode for optimum setting.
Specifications for RIVKLE® EPX009 control unit.
Battery tool with electro-hydraulic tech, up to 800 cycles per battery.
Specifications for RIVKLE® B2007: stroke, force, battery, weight.
100% setting control, pressure method, high production, touchscreen.
Indicates actual force applied, allowing precise adjustment and control.
Guide for changing nose cone, mandrel, and anvil on RIVKLE® tools.
To Next Page
