14
RIVKLE
®
– Force setting powertool - Process control
RIVKLE
®
EPX009 - Process control
Advantages:
Validates the conformity of setting by controlling
stroke done during setting
Detailled error reporting for better correction and
prevention
Ensures optimum setting of RIVKLE
®
Teaching mode to adjust all parameter of control
Theory
RIVKLE
®
EPX009 tool includes hydo-pneumatic tool (based on RIVKLE
®
P1007, RIVKLE
®
P2007 or RIVKLE
®
P3007)
connected to a control box unit.
It's the basic process control level, allowing a 100% control on stroke.
Force is defined by classic hydro-pneumatic adjustment device.
We recommend to use a force controller RIVKLE
®
FC340 (see page 20) for correct set up and monitoring.
Characteristics
Available for the complete range of power tools: RIVKLE
®
P1007 / P2007 / P3007
Controls process based on stroke monitoring: RIVKLE
®
EP X009 compares real stroke to the preset value
LED indicator on EP box and on the rear of the tool (green, orange and red)
Quick connect multi-energy hose (5 m standard; 10 & 15 m as option)
Fault acknowledgment on screen (air supply management)
HMI screen (3,5”)
RK HANDTOOLS EN:Mise en page 1 25/11/19 13:33 Page 14
To Next Page
Loading...
