Bomag BPR 25/40 D - Shutting Down the Engine

2SHUDWLRQ
%20$* 22 BPR 25/40 D
Fig. 14
● Keep moving the throttle lever (Fig. 14) be-
tween 3/4 and full throttle position.
● At the same time pull the vibratory plate by the
steering rod from right to left and vice versa,
until the machine is free.
 Danger
Danger of accident!
To avoid injuries during reverse travel you
should always guide the machine by the han-
dle from the side.
3.6 Shutting the engine down

Caution
Do not shut the engine down all of a sudden
from full load, but let it run with idle speed for
a while for temperature equalization.
Fig. 15
● Shift the throttle lever to position "Min" (Fig.
15) and let the engine run with idle speed for a
short while.
Vibration is shut down.
Fig. 16
● Shift the throttle lever to position STOP (Fig.
16), the warning buzzer sounds.
Go to Discount-Equipment.com to order your parts