Bomag BPR 25/40 D - Semi-Annual Maintenance: Oil Checks and Changes

0DLQWHQDQFHHYHU\PRQWKV
%20$* 36 BPR 25/40 D
Maintenance ev ery 6 months
4.10 Checking the oil level in the
vibrator housing
L
Note
Stand the machine on level ground.
Fig. 27
● Unscrew the level plug (Fig. 27) and check the
oil level.
The oil level must reach the bottom edge of the
level bore, top up oil if necessary.
For quality and quantity of oil refer to the table
of fuels and lubricants.
● Screw the level plug back in with a new seal
ring.
4.11 Changing the engine oil

Caution
Stand the machine on level ground.
Drain the engine oil at operating temperature.
Environment
Catch running out fuel, do not let it seep into
the ground and dispose of environmentally.
 Danger
There is a danger of scalding when draining
hot engine oil.
Fig. 28
● Remove the guards (Fig. 28).
Fig. 29
● Remove the oil dipstick from the oil filler open-
ing (Fig. 29).
Go to Discount-Equipment.com to order your parts