Bomag BPR 45/55 D - Shutting Down the Engine

Operation
BOMAG32 BPR 45/55 D, BPR 55/65 D
5.8 Shutting down the engine
Caution
!
Do not shut the engine down all of the sudden
from full speed, but let it idle for a while for
temperature equalization.
Fig. 32
l Shift the throttle lever to position "MIN" (Fig.
32) and let the engine run with idle speed for a
short while.
l Vibration is shut down.
Fig. 33
l Set the throttle lever (Fig. 33) to position
"STOP".
The warning buzzer sounds.
Fig. 34
l Turn the ignition key (Fig. 34) to position "0"
and pull it out.
The warning buzzer no longer sounds.