ROUTINE CARE
STUBBORN STAINS
※Stubborn stains, discoloration and possibly rust pitting can occur from exposure to harsh outdoor conditions.
※Be careful not let any powder or solvent come in contact with painted or plastic components as damage may occur.
※Store the firebowl in a cool dry place away from direct sunlight.
※
The propane cylinder must be disconnected and removed from the firebowl before the appliance can be stored indoors.
※Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise may void the warranty of
this product and result in a hazardous condition.
※Please contact the Manufacturer for information regarding replacement hoses, ignitors, lava rocks or pumice stone,
etc.
PLEASE CALL BOND TOLL FREE #
1-866-771-BOND(2663) OR TO BETTER
EXPEDITE YOUR REQUEST FEEL FREE TO EMAIL US
Observe flame height when lit: (Check it for each use)
Flame should possibly be a yellow/blue color between
2 to 10 inches high.
TO EXTINGUISH
MAINTENANCE
1. Turn and push the control knob clockwise to the OFF position.
2. Close cylinder valve, disconnect propane cylinder.
CAUTION: Disconnect Propane cylinder when this appliance is not use.
※ Keep your firebowl free and clear from combustible materials.
※ Visually inspect burner from obstructions, keep firebowl free and clear from debris.
※ After the burner and lava rocks or pumice stones are completely cooled down, use a soft brush to get rid of the mild
stains, loose dirt and soil. Wipe with a soft cloth.
BOND MANUFACTURING CO.
1700 West 4th Street Antioch, CA 94509 USA
customer.service@bondmfg.com
OR LOG IN TO OUR WEBSITE UNDER CUSTOMER SERVICE SUPPORT
IF YOU HAVE QUESTIONS OR CONCERNS
To Next Page
Loading...
