15
en
The selected performance level is indicated by the
number of LEDs that light up above the output re-
gulator.
3. Briefly press the output regulator once to exit
manual mode and to reactivate AUTO mode.
4. Briefly press the output regulator once more to
switch o the BONECO appliance.
If you exit AUTO mode, the BONECO appliance
will continue at the selected performance
level until the water base is empty, regardless of
what the current level of humidity is.
MANUAL CONTROL
1. Briefly press the output regulator once to switch
on the BONECO appliance.
The appliance is always in AUTO mode when it is
switched on.
2. Adjust the output to your needs by setting the
output regulator to the desired level from 1 to 6.
This action exits AUTO mode (AUTO LED is o).
To Next Page
Loading...
