33
en
ABOUT THE A681 HYBRID FILTER
The A681 HYBRID filter has to be changed after
about one year to ensure that dirt and pollen conti-
nue to be filtered from the air.
The display indicates a pending need to replace the
A681 HYBRID filter with the following symbol:
The A681 HYBRID filter is replaced according to the
figures on pages 12 and 13.
You can obtain an A681 HYBRID filter from your
BONECO specialist dealer or the BONECO online store
at www.shop.boneco.us.
REPLACING THE A681 HYBRID FILTER
1. Remove the front cover of the BONECO H700.
2. Take o the pre-filter.
3. Remove the used A681 HYBRID filter and dispose
of it with your regular household waste.
4. Remove the protective foil from the new A681
HYBRID filter.
5. Insert the A681 HYBRID filter into the holder as
shown on the label.
6. Reinsert the pre-filter and the front cover.
DELETING A NOTICE IN THE APP
The notice can be deleted from the display in the
BONECO app.
DELETING A NOTICE ON THE APPLIANCE
The notice can also be deleted on the appliance.
1. Press and hold the output regulator for three sec-
onds until the “CL” notice flashes on the display.
2. Use the output regulator to select the symbol.
3. Briefly press the output regulator to confirm the
selection.
The notice is deleted.
REPLACING THE ACCESSORIES
To Next Page
Loading...
