Choose a wake up sound with the arrow buttons. It is also possible to tset
vibration only (no sound).
To measure the time you start the stopwatch with the " Right arrow" . You can press
the "Right arrow " key again to hear the elapsed time. You can stop the watch with
the " Left arrow" . You can resume the stopwatch With " Right arrow". If you press
and hold the " Left arrow" , the timer is reset to zero . The stopwatch continues to run
if M312 Ace is off.
The last setting is a simple timer. It works independently of the other settings.
Choose with the “Right arrow” a duration up to 60 minutes. The countdown
starts immediately. To stop the timer before it is due, reduce the number of
minutes to zero, by using the “Left arrow” button.
If you hold down the "Mode" for 2 seconds, you access the menu and get a quick summary of your alarm
settings.
4.3.2. Dismiss the alarm
To stop the alarm melody or vibration, press the "Play" button.
4.3.3. Retrieving Time and Date
Press the "Play" button to retrieve the time. Keep the button pressed to hear the date announcement.
4.3.4. Time and date settings
The time and date can be changed in the menu under " Basic Settings" . Keep the "Mode " button pressed
for 2 seconds until you hear the information about the alarm settings . If you then press twice on the "
Right arrow" , you will hear the message " Basic Settings" . With the " mode " button you can now select
the individual terms such as hour, minute , day, month and year and there enter the correct values with the
arrow keys . The settings will be saved automatically . The menu allows you to leave with "Selector" again .
If you press no keys within a few seconds , M312 Ace leaves the menu automatically.
4.3.5. List of keyboard shortcuts - Alarm Clock
To Next Page
Loading...