7
2.2 Layout description
2.2.1. The operating surface
Holding your Milestone 312 Ace in your hand , you will find five buttons on the Front Face of the machine.
In the middle is a large key and four other buttons are arranged around it in the shape of a cross.
The middle button can be identified not only by its size and central location, but also by its smooth surface.
The name of this button is "Play". Now we look at the buttons surrounding the "Play" button.
If you move your thumb down, you will feel the "Mode" button. The "Mode" button is the same size as the
"Play" button, but marked with a tactile X.
Below this you will feel the small, round holes of the speaker. Returning to the buttons, the other three
keys are slightly smaller.
Immediately to the left of the central "Play" button, you will feel the "Left arrow". You will recognize it by
the highlighted arrow pointing to the left.
If you move to the right of the "Play" button you will find the "Right arrow", also a tactile arrow but
pointing to the right.
The fifth and final key is located above the "Play" button. This is the "Rec" button and you will find a small
round indentation in the center.
The four buttons, which are arranged around the "play" button, are often used in the style of a navigation
cross. With the "Left arrow" you navigate to the left, the top "Rec" button takes you to the top with the
"Right arrow" to the right and the bottom "Mode" button you move down.
Now you are familiar with the user interface of the keys of your Milestone 312 Ace.
In addition to the aforementioned buttons there is a small indentation in the upper left corner for the red
LED.
2.2.2 Get to know the top edge of the device
Left on the top edge of Milestone is the sixth and last button, the "Selector". This key is narrow and
protrudes from the device. In the middle of the top side is an elongated opening. This is the USB port. The
cable is connected here for connection to a computer. To charge the battery of your milestone, connect
the charging cable to this port. Far right on the top edge you will find the connector for external
microphones and line-in connections.
2.2.3. Get to know the bottom
On the lower side is the headphone jack.
2.2.4. Get to know the right long side
On the right lateral side of the device you will find a slot. This opening is the slot for SD cards, for
expanding the storage space.
2.3. Use of the terminals
M312 Ace has jacks for headphones, external microphone, USB cable and SD memory cards. The following
sections describe the various ports in detail.
2.3.1. Charging the battery
Please connect the charger to an AC outlet. The other end of the cable to the mini-USB port which is
located on the top edge of your Milestone. If M312 Ace is properly connected, the start of the charging
process is confirmed by a low beep. While charging the battery, the LED lamp flashes at 3-second
To Next Page
Loading...