Beep sound - Gives a beep at preset time and date. Without interruption, this
reminder lasts for 2 minutes.
Voice message playback - Plays your voice record at preset time and date
and repeats it during 2 minutes. In order to do this, create a voice message.
Push and hold the “Rec” button. After you hear a click speak your message. For
example “Appointment with the dentist in Zürich. Do not forget to clean your
teeth”. To finish the recording release “Rec”. If you do not like your record just
create a new one. The previous one is automatically erased.
Voice record without playback - Is the same as “Voice message playback”
but without an announcement at the preset time. Event so marked only appears
in “List by date” and “List by repetition”.
Audio playback - Plays the files of a special folder once at preset time and
date. Agenda takes the files, which are located in the subfolder “playback” of the
folder “Agenda” on the internal memory. If you store more than one file in this
folder Milestone plays in alphabetical order.
Radio playback - Plays the radio signal at preset time and date. Agenda plays
from the frequency which is set in the application “Radio”.
Radio recording - Records the radio signal at the preset time and date.
Milestone 312 records from the frequency, which is set in the application
“Radio”. The recording is saved as MP3 file in the folder “Radio” on the internal
memory.
Microphone recording - Records from the internal or an external microphone
at preset time and date. The recording is saved as MP3 file in the subfolder
“records” inside the folder “Agenda” on the internal memory.
Add a time frame to an event with the arrow buttons. For the events “Beep
sound”, “Voice message playback” and “Voice message without playback” you
can add the duration as additional information in “List by date” and “List by
repetition”. So if a meeting lasts 50 minutes you can add this information.
The other events with an executive characteristic: “Audio playback”, “Radio
playback”, “Radio recording” and “Microphone recording” you can limit with
“Duration”. For example, set the time of “Duration” to 45 minutes to record a 45
minutes report on the radio.
To Next Page
Loading...