BONFIGLIOLI Vectron ACTIVE

Need help?

Do you have a question about the BONFIGLIOLI Vectron ACTIVE and is the answer not in the manual?

Summary

General Safety Instructions and Information on Use

General Information and Warnings

Covers DC link charging, high voltage risk, and general safety precautions.

Purpose and Compliance of Frequency Inverters

Explains the intended use and relevant compliance standards for the inverters.

Transport and Storage Guidelines

Provides procedures for safe transport and storage of the units.

Handling and Installation Precautions

Details careful handling to prevent damage from mechanical stress or static electricity.

Electrical Connection Safety Requirements

Outlines safety measures and compliance for electrical connections.

Information on Use and Maintenance

Guidance on operational use, maintenance, and service procedures.

Plug Assignment, Bus Termination, and Cables

RS232 Module CM-232 Pinout Configuration

Details the pin connections for the RS232 module and cable requirements.

RS485 Module CM-485 Pinout Configurations

Details pin connections for RS485 modules (DB9 and Terminal types).

RS485 Bus Termination Setup

Explains how to configure RS485 bus termination for reliable communication.

Startup and Configuration Procedures

General Configuration Methods Overview

Outlines various ways to configure communication modules (PC, PLC, Control Unit).

RS232 Module CM-232 Configuration Settings

Details for setting baud rate, parity, and Modbus address for CM-232.

RS485 Module CM-485 Configuration Settings

Details for setting baud rate, parity, and Modbus address for CM-485.

Modbus Serial Line Protocol

Modbus Master;Slave Protocol Principles

Explains the master/slave communication model and transaction types.

Modbus Message Structure Explained

Details the fields within a Modbus message: Address, Function Code, Data, CRC/LRC.

Supported Modbus Function Codes

Lists and describes available function codes for reading/writing parameters.

Modbus Exception Handling and Codes

Explains exception responses and lists common error codes.

Modbus Transmission Modes: RTU vs. ASCII

Compares RTU and ASCII transmission modes, including framing and error checking.

Modbus Timing and Watchdog Functions

Covers timing requirements for communication and watchdog monitoring.

Data Sets and Cyclic Writing

Accessing Data Sets for Parameters

Explains how to read and write data sets for inverter parameters.

Cyclic Writing and EEPROM Write Limits

Considerations for frequent writes to EEPROM and RAM.

Modbus Message Examples

RTU Modbus Message Examples

Practical examples demonstrating RTU Modbus communication.

ASCII Modbus Message Examples

Practical examples demonstrating ASCII Modbus communication.

ACT Inverter Control and Reference Value

ACT Inverter Control Methods Overview

Overview of control options: digital contacts, statemachine, and remote.

ACT Inverter Reference Value Sources

Setting frequency and percentage references for ACT inverters.

ACU Inverter Control and Reference Value

ACU Inverter Control Methods Overview

Overview of control options: contacts, remote contacts, and state machine.

ACU Inverter Reference;Actual Value Settings

Setting and reading reference and actual values for ACU inverters.

Parameter List Overview

Actual Values Menu (VAL) Explained

Detailed list and explanation of actual values available in the inverter.

Parameter Menu (PARA) Explained

Detailed list and explanation of configurable parameters for communication modules.

Annex: Warnings, Errors, and Tables

Warning Messages Documentation

List of warning codes and their descriptions for the inverter.

Error Messages Documentation

List of error codes and their meanings for fault diagnosis.

ASCII Character Table Reference

A table mapping ASCII character codes from 0x00 to 0x7F.