BONFIGLIOLI Active Cube Series User Manual

10
Liquid Cooling ACU / ANG /AEC
11/17
2.7 Operator's general plant documentation
 In addition to the Operating Instructions, the operator should issue separate internal user manu-
als for the frequency inverter. The Operating Instructions of the frequency inverter must be in-
cluded in the Operating Instructions of the whole plant.
2.8 Operator's/operating staff's responsibilities
2.8.1 Selection and qualification of staff
 Any work on the frequency inverter may only be carried out by skilled personnel. The staff must
not be under the influence of any drugs. Note the minimum age required by law. Define the staff's
responsibility pertaining to all work on the frequency inverter clearly.
 Work on the electrical components may only be performed by a qualified electrician according to
the applicable rules of electrical engineering.
 The operating staff must be trained for the relevant work to be performed.
2.8.2 General work safety
 In addition to the Operating Instructions of the machine/plant, any applicable legal or other regu-
lations relating to accident prevention and environmental protection must be complied with. The
staff must be instructed accordingly.
Such regulations and/or requirements may include, for example, handling of hazardous media and
materials or provision/use of personal protective equipment.
 In addition to this Operating Instructions, issue any additional directives that may be required to
meet specific operating requirements, including supervision and reporting requirements, e.g. di-
rectives relating to work organization, workflow and employed staff.
 Unless approved of expressly by the manufacturer, do not modify the frequency inverter in any
way, including addition of attachments or retrofits.
 Only use the frequency inverter if the rated connection and setup values specified by the manu-
facturer are met.
 Provide appropriate tools as may be required for performing all work on the frequency inverter
properly.
2.8.3 Ear protectors
 The frequency inverter produces noise. Due to noise development, frequency inverters should
only be installed in normally unstaffed areas.
 Noise emission in operation is < 85 dB(A) in the case of sizes 1 through 7.
 Noise emission in operation is approx. 86 dB(A) in the case of size 8. Ear protectors must be used
when staying near the frequency inverter.
2.9 Organizational measures
2.9.1 General
 Train your staff in the handling and use of the frequency inverter and the machine/plant as well
as the risks involved.
 Use of any individual parts or components of the frequency inverter in other parts of the opera-
tor's machine/plant is prohibited.
 Optional components for the frequency inverter must be used in accordance with their designated
use and in compliance with the relevant documentation.
2.9.2 Use in combination with third-party products
 Please note that Bonfiglioli Vectron MDS GmbH will not accept any responsibility for compatibility
with third-party products (e.g. motors, cables or filters)..
 In order to enable optimum system compatibility Bonfiglioli Vectron MDS GmbH offers compo-
nents facilitating commissioning and providing optimum synchronization of the machine/plant
parts in operation.

BONFIGLIOLI Active Cube Series Specifications

General

Brand	BONFIGLIOLI
Model	Active Cube Series
Category	DC Drives
Language	English