Liquid Cooling ACU / ANG /AEC
2.4 Safety and warning signs on device
Comply with all safety instructions and danger information provided on the device.
Safety information and warnings on the device must not be removed.
2.5 Warning information and symbols used in the Operating Instruc-
tions
2.5.1 Hazard classes
The following hazard identifications and symbols are used in the Operating Instructions to mark par-
ticularly important information:
Identification of immediate threat holding a high risk of death or serious injury if not
avoided.
Identification of immediate threat holding a medium risk of death or serious injury if not
avoided.
Identification of immediate threat holding a low risk of minor or moderate physical injury
if not avoided.
Identification of a threat holding a risk of material damage if not avoided.
No switching; it is forbidden to switch
the machine/plant, assembly on
To Next Page
Loading...
Need help?
General
