5
WARNING
Do not use a separate device to switch ON or OFF motor during operation. Otherwise,
the inverter may experience an over-current breakdown.
WARNING
z
Do not remove the front cover of the inverter when the power is ON to avoid
personnel injury caused by electrical shock.
z
When the automatic restart function is enabled, the motor and machinery will be
restarted automatically.
CAUTION
z
Do not touch the heat-sink base during operation.
z
The inverter can be easily operated from a low-speed to high-speed range. Please
reconfirm the operating range of motor and the machinery you are controlling.
z
Do not examining the signals on the PCB of the inverter when it is under operation.
z
All inverters are properly adjusted and set before delivery.
CAUTION
Do not proceed with disassemble or examination procedure before ensuring that the
power is off and the Power LED extinguished.
When performing an examination or maintenance
CAUTION
Inverter environment should be within temp: –10 °C ~ +40
°C, humidity under 95% RH
without condensing.
CAUTION
After the removal of shield sticker, the environment temperature should be within
–10 °C ~ +50 °C and humidity under 95% RH without condensing. Besides, the inverter
should be free from water dripping or metal dust.
To Next Page
Loading...
Need help?
General
