BONFIGLIOLI Vectron Syn10 S220 03 AF

www.bonfiglioli.com
Bonfiglioli Riduttori S.p.A.
Via Giovanni XXIII, 7/A
40012 Lippo di Calderara di Reno
Bologna, Italy
tel: +39 051 647 3111
fax: +39 051 647 3126
bonfiglioli@bonfiglioli.com
www.bonfiglioli.com
VEC 114 R1
SYNTHESIS
Operations Manual
single phase 115 V 0.2 - 0.75 kW
single phase 230 V 0.2 - 2.2 kW
three phase 400 V 0.75 - 2.2 kW
Bonfiglioli has been designing and developing innovative
and reliable power transmission and control solutions
for industry, mobile machinery and renewable energy
applications since 1956.

BONFIGLIOLI Vectron Syn10 S220 03 AF Specifications

General

Brand	BONFIGLIOLI
Model	Vectron Syn10 S220 03 AF
Category	Controller
Language	English

Summary

1. Foreword

Product Safety Precautions

Safety precautions regarding warnings and cautions for safe operation and handling.

Operational Warnings & Cautions

Warnings about personnel injury and system damage from improper operation.

1. Precautions for Operation

Operation Safety Before Power-On

Crucial safety steps before applying power, including voltage selection and wiring.

Wiring and Installation Safety

Precautions for correct wiring, transportation, installation, and environmental conditions.

When Power is Applied

Power Application Safety Procedures

Do not connect/disconnect connectors when power is on; understand momentary power loss behavior.

Under Operation Safety

Operational Safety Measures

Avoid using separate devices for ON/OFF; do not remove covers when powered.

Examination and Maintenance Safety

Ensure power is off before examination or maintenance procedures.

EMI Connection Procedures

4. Wiring Diagram

Parameter List

Parameter Function Descriptions

Factory Settings and Timing Parameters

Warning on factory settings and details on acceleration/deceleration time parameters.

Frequency and Speed Control Parameters

Frequency Limits and Speed Settings

Setting upper/lower frequency limits, SP1, JOG frequencies, and Start/Stop control.

Torque, Stopping, and Braking Parameters

DC Braking Configuration

Setting DC braking time, starting frequency, and level.

Motor Overload Protection (F18)

Auto-Restart Configuration (F23, F24)

Malfunction Indications and Countermeasures

Manual Reset Inoperative Malfunctions

Troubleshooting for malfunctions that do not respond to manual reset.

Manual Reset Operative Malfunctions

Troubleshooting for malfunctions requiring manual reset or with auto-reset issues.

Operative Malfunction Troubleshooting

General Malfunction Examination Method

Routine Examination and Periodical Maintenance

Voltage and Current Measurement Guide