Bonnet B1A9S+50EBE - Water Connection

Page 17 3BE390845NI – 01/12
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
4.3 WATER CONNECTION
- Hot and Cold water supply.
- Minimum pressure 150 kPa / 1.5 bar, max 600 kPa / 6 bar.
- Maximum temperature for cold water 30°C.
- Maximum temperature for hot water 60°C.
- Fit local stop cocks.
- Connection 20/27 ∅ (3/4") and 21 ∅ (1/2") flexible.
Advancia type bratt pan Advancia Plus type bratt pan
Cold water Hot water Cold water Hot water
Advancia Plus cantilevered bratt pan
Cold water Hot water
Water supply pipe purging
A purge has been added to the water delivery, this automatically purges the pipe work after the well is
filled. This purging produces a trickle of water from below the front of the unit which runs into the floor
gulley.
If this is undesirable for any reason it is possible to:
- connect the outlet directly to drain using 6mm internal diameter silicone hose
- block the outlet with an 8mm M4 setscrew (note: the purge will no longer work)