Bonnet B1A9S+50EBE - Assembling Units on a Concrete Plinth

Page 12 3BE390845NI – 01/12
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
3.3 ASSEMBLING UNITS ON A CONCRETE PLINTH
Dimensions for a wall or central island concrete plinth
Am
Ls
Ac
Wall
Centrally
(side view)(side view)
(front view)
Full tiled base
Lf: Stove width
Stove depth Stove depth Stove depth
Full tiled base Full tiled base Full tiled base
1 cm/m maximum slope 1 cm/m maximum slope 1 cm/m maximum slope
Finished
height with
tiled front
Finished
height with
tiled front
Plinth dimensions
Range
Am
Depth of wall plinth
Ac
Depth of central plinth
Ls
Plinth length
Finished height
tiled to front
Advancia 710 1420 Lf-50 110
A technical compartment is required if the stop cock, isolator or gas regulator is to be located in the
suite.
There are two possible solutions:
1) Neutral unit on a 200 or 400mm technical compartment.
2) 400mm services cupboard with any possible cooking top or neutral unit (but not induction)