Page 4 3BE390845NI – 01/12
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
1 DATA PLATES
1.1 GAS BRATT PAN
The data plates are stuck to the upper part of thecontrol panel (see diagram below).
In any correspondence about your equipment, please indicate:
- The model number (Model.)
- The serial number (Fab.Nr.)
- The date (Date).
Data plate
Gas setting plate
The box marked with a cross indicates the gas for which
the appliance has been adjusted
A second adjacent plate indicates:
- The gas that the unit is set up for
- The intended destination.
Country of destination
Advancia bratt pan
Advancia Plus bratt pan
Location of data plates Location of data plates
To Next Page
Loading...