Page 5 3BE390845NI – 01/12
BONNET GRANDE CUISINE
Registered office:
Rue des Frères Lumière - Z.I Mitry Compans
F-77292 MITRY MORY Cedex
IN CASE OF A CHANGE OF GAS (See Section: Changing the appliance from one gas to
another). Modify this plate, and indicate the new gas to be used.
Fill in the "Pays" zone with the name of the country where the appliance is installed.
NOTE: Both the gas and pressure for which the appliance is set must be authorised in the
country in question. Check this point in the section: Changing the appliance from one gas to
another.
1.2 ELECTRIC BRATT PAN
The data plate is stuck to the upper part of the control panel (see diagram below).
In any correspondence about your equipment, please indicate:
- The model number (Model.)
- The serial number (Fab.Nr.)
- The date (Date).
Data plate
Advancia bratt pan
Advancia Plus bratt pan
Location of data plate Location of data plate
To Next Page
Loading...