14
This section tells you how to change individual items in the set-up without doing
a complete re-set, which erases all settings.
To set-up values on the computer, you must remove it from its band.
To re-set the tire size
1. Browse
M
to the trip screen.
2. Press
SET
.
The units (mph or kph) appear.
3. To change units (choose kmh or mph), press
M
.
To save and proceed to the tire size screen, press
SET
.
4. To change the tire size, press
M
. Repeat until your preferred size appears.
You can also set a custom tire size; see Setting a Custom Tire Size, page 11.
To save, press
SET
.
After you save your changes, the GoTime switches to ride mode and the trip
screen appears.
Changing the setup
To Next Page
Loading...
