20
5. To change the minutes, press
M
.
To scroll faster, hold
M
for a few moments.
To save and exit the set-up procedure, press
SET
.
After you save your changes, the GoTime switches to ride mode and the clock
screen appears.
To re-set all data and settings
A Re-set of the computer erases all data and settings. Before you do a re-set,
you may want to write down your odometer total.
1. Remove the computer from its band.
2. Press the
AC
button (Figure 2).
The ‘mph’ screen appears and you can start the procedure To Set-up Your
Preferences, page 3.
To Next Page
Loading...
