EasyManua.ls Logo

BOOM TRIKES V2 Automatic - Tyre Pressure and Condition Monitoring

BOOM TRIKES V2 Automatic
55 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4.6 TYRES
Regularly check the tyre pressures!
FITTING TYRES OTHER THAN THOSE RECOMMENDED CAN LEAD TO UNSTABLE
HANDLING. WE URGENTLY RECOMMEND THAT YOU ALWAYS FIT TYRES WHICH
CONFORM TO THE ORIGINAL VEHICLE SPECIFICATIONS.
The tyres have tread markers to indicate the degree of wear. Replace the tyres as soon as these
markers become visible on the tread. Check the tyres for damage, e.g. cuts or an uneven pattern of
wear. To replace tyres, contact a specialist dealer or a tyre dealer with the necessary workshop
equipment.
FRONT WHEEL: 2.3 bar REAR WHEELS: 2.5 bar
PUNCTURES
This vehicle is equipped with tubeless tyres. If a puncture occurs then air takes much longer to escape
than from a tube. On the roads this ensures a greater safety margin. Temporary repairs can effected by
using a tyre repair foam, or a tyre repair kit for tubeless tyres.
REFER TO THE MANUFACTURER’S INSTRUCTIONS ON HOW TO USE TYRE REPAIR
FOAM.
In order for permanent tyre repairs to be carried out, or in order to change a tyre we recommend that
you contact a specialist dealer. In order to change a tyre the corresponding wheel will have to be
removed. Contact your specialist dealer to have him carry out this job.
FRONT AND REAR WHEELS MUST ALWAYS BE BALANCED. RIDING A VEHICLE WITH
UNBALANCED WHEELS OR WITH INCORRECT TYRE PRESSURES CAN LEAD TO
ACCIDENTS.
33