Safety Instructions for Wall Charger
Please read the following information carefully:
• The maximum ambient temperature for use of the wall charger shall not exceed 45°C (113 °F).
• The wall charger shall be installed according to specification. The current of load and output
power shall not exceed the following values:
• Input: AC100-240V @ 50/60Hz; 0.35A
• Output: DC5V; 2A
• The wall charger shall be used for IT equipment only.
• The wall charger is designed for indoor use only.
• Cleaning – Unplug the wall charger from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners to clean: use only a dry cloth.
• Water and moisture – Do not use this product in a moist or wet environment.
• Self-servicing – Attempting to service this product on your own, or opening or removing device
covers may result in exposure to dangerous voltage or other hazards.
• Unplug the wall charger during lightning storms or when unused for lengthy durations.
• This wall charger is not intended to be repaired by service personnel in case of failure or
component defect.
To Next Page
Loading...
