Why is the station searching weak on my Booster Car Video System?
If your Booster Car Video System has weak station searching, it could be due to the auto antenna not being fully extended or properly connected. Connect the auto antenna control cable properly. Also, check if the LOCAL function is activated and turn it off.
What to do if my Booster Car Video System remote isn't working?
If the IR remote for your Booster Car Video System does not work, the battery may be dead. Replace the battery. If that doesn't work, remove the battery and install it correctly.
How to stop excessive skipping on my Booster BDVM-8455MPBTV Car Video System?
If your Booster Car Video System experiences excessive skipping, ensure the unit is mounted correctly by checking the mounting sleeve. Also, inspect the media for scratches, as a physical defect could be the cause.
Why does my Booster Car Video System only have audio in reverse?
If your Booster Car Video System has audio only when in reverse, check the connections at the parking brake to ensure the parking brake safety circuit is connected. Also, make sure to apply the parking brake.
Why is there no video when reversing with my Booster Car Video System?
If there is no video display on your Booster Car Video System when in reverse, check the connections at the reverse lamp to ensure the reverse circuit is properly connected. Also, make sure the vehicle is actually in reverse gear.
Why is the sound quality poor on my Booster BDVM-8455MPBTV?
If your Booster Car Video System exhibits poor sound quality or distortion, it might be due to the speaker power rating being incompatible with the unit. Ensure you connect proper speakers. Also, check the speaker wire contact, as the speaker might be shorted.
What to do if my Booster BDVM-8455MPBTV has power but no audio?
If your Booster Car Video System has power but no or low audio output, start by checking the speaker wire connections at the speakers. Ensure that none of the speaker wires are touching each other or the chassis ground; insulate any bare wires to prevent this. If the problem persists, review the wiring diagram and check if the speakers are damaged.
Why does my Booster BDVM-8455MPBTV Car Video System unit keep blowing fuses?
If your Booster Car Video System unit blows a fuse, it could be due to the yellow or red wire, or speaker wires touching the chassis ground. Check for any pinched wires. It could also be due to an incorrect fuse rating. Ensure you are using a fuse with the correct rating.
Essential safety guidelines and precautions for installation and usage.
Critical warnings regarding product use, electrical safety, and environmental exposure.
Important cautions and warnings for safe and correct wiring procedures.
List of necessary tools and supplies for installing the unit.
Detailed steps for installing the unit using different methods.
Description of the base panel controls and the reset button functionality.
Detailed explanation of each button's function on the remote control.
Instructions for replacing the battery in the remote control.
Step-by-step guide to calibrate the touch screen for accurate input.
Configuration settings for DVD playback, including system and language.
Steps for pairing, connecting, and managing Bluetooth devices.
Instructions for playing music and videos from an iPod.
Adjusting screen brightness, contrast, tint, and color.
Settings for treble, bass, balance, fader, and buzzer.
Configuring the clock display and time mode (12/24 hour).
Setting up screen saver images and activation time.
Configuring radio area, GUI, EQ, LOUD, and default system settings.
General| Touch Screen | Yes |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| DVD Player | Yes |
| Radio Tuner | Yes |
| Rear Camera Input | Yes |
| Steering Wheel Control | Yes |
| FM Radio | Yes |
| Power Output | 4 x 45W |
| Compatibility | Universal |
| Resolution | 800 x 480 |
| Screen Type | TFT LCD |
| Supported Media Formats | MP3, WMA, AVI, JPEG |
To Next Page
