Bosch 2212 - Page 38

38
HOLD
TO VIEW
FAULTED POINTS
Indicates a point is faulted. Hold
[
] to see which point it is.
(IDLE TEXT LINE 1)
(IDLE TEXT LINE 2)
This display is shown when the
system is turned off.
LOW BATTRY PT ##
[point text]
Indicates a point has a low battery.
Call your alarm company for service.
MISSING PT ##
[point text]
Indicates an RF point is in trouble.
Call your alarm company for service.
NO FIRE TROUBLES
Indicates the system has no fire
troubles.
NO POINT
TROUBLES
Indicates the system has no point
troubles.
NOT READY TO
TURN ALL ON
An All point is faulted. Correct the
fault, bypass the point, or turn the
system Part On.
NOT READY TO
TURN ON
A Part point is faulted. Correct the
fault or bypass the point.
OK TO STEP
OUTSIDE NOW
Indicates the Step Outside feature is
activated.
PART ON NO DELAY
SYSTEM OK
Indicates part of the system is turned
on, with no entry or exit delays.
PART ON
SYSTEM OK
Indicates part of the system is turned
on and all points are normal.
PHONE TEST
PASSED
Indicates the phone test was
completed successfully.
PHONE TEST
FAILED
Indicates the phone test has failed.
PHONE TROUBLE
CHECK DIAL TONE
Indicates a problem with the phone
line. Check for a dial tone.
POINT ##
NOT A WATCH POINT
Indicates the point cannot be
watched.
POINT ##
NOT BYPASSABLE
Indicates the point cannot be
bypassed.
POINT ##
ALREADY BYPASSED
Indicates the point cannot be
bypassed.