Bosch 2212 - Page 39

39
POINT ## FAULTED
[point text]
Indicates the named point is faulted.
POINTS FAULTED
Indicates the system has faulted
points.
POINTS FAULTED
press
Prompt to press [ ] to bypass a
point that became faulted during exit
delay.
PRESS 1 FOR
OWNER TYPE
Prompt to press [1] to assign an
Owner type passcode to a given user.
PRESS 1 FOR
TONE OFF
Prompt to press [1] to turn off the
watch tone feature.
PRESS 2 FOR
USER TYPE
Prompt to press [2] to assign a User
type passcode to a given user.
PRESS 2 FOR
SHORT BEEP
Prompt to press [2] to activate the
watch tone feature. Faulted watch
points causes the keypad to emit a
short beep.
PRESS 3 FOR
ONE-TIME
Prompt to press [3] to assign a One-
Time type passcode to a given user.
PRESS 3 FOR
BEEP TILL KEY
Prompt to press [3] to activate the
watch tone feature. Faulted watch
points causes the keypad to beep
until a key is pressed.
PRESS 4 FOR
DISABLED
Prompt to press [4] to disable a
passcode.
PRESS 4 FOR
BEEP TILL CLOSED
Prompt to press [4] to activate the
watch tone feature. Faulted watch
points causes the keypad to beep
until the point is returned to normal.
PRESS [##] TO
TURN WATCH
[ON/OFF]
Instructs you to enter the point
number followed by [
] to toggle a
watch point on and off.
PRESS [##]] TO
BYPASS PT ##
Instructs you to press the point
number followed by [
] to bypass
the point.