Bosch 5000 Series - Oven Parts and Accessories

IR Illuminator 5000 Installation | en 5
Bosch Security Systems B.V. Installation note 9.2018 | 2.2 | AM18-Q0715
Changing the beam-angle filter
Insert a beam-angle filter as follows:
1. Insert the supplied tool into the slot and twist. (Use the thick end for the IIR-50xxx0-SR
illuminator; use the tapered end for all other illuminators.)
IIR-50xx0-SR
IIR-50xx0-MR/LR/XR
NIR-50xx0-MRP
2. Remove the top cover.
3. Peel back the protective foil from the adhesive points.
4. Attach the selected beam-angle filter with the label side up to the adhesive points.
“click”
5. Click the top cover back into place.