General information on property damage andproduct damage 17/52
RE 91071-01-B/03.2015, A2FM/A2FE Series 70, Bosch Rexroth AG
NOTICE
Escaping or spilling hydraulic fluid!
Risk of environmental pollution and contamination of groundwater!
▶ Always place a drip tray under the axial piston unit when filling and draining the
hydraulic fluid.
▶ Use an oil binding agent if hydraulic fluid is spilled.
▶ Observe the information in the safety data sheet for the hydraulic fluid and the
specifications provided by the system manufacturer.
Danger from hot components!
Nearby products can be damaged! Components which heat up (e.g., solenoids) can
cause damage to nearby products if they are too close.
▶ When installing the axial piston unit, check the distances to nearby products to
ensure that they are not damaged.
The warranty only applies to the delivered configuration.
The warranty is void in case of improper installation, commissioning and operation,
as well as improper use and/or improper handling.
To Next Page
Loading...
