Need help?Do you have a question about the Bosch Hagglunds CB and is the answer not in the manual?
Overview of the manual's scope, related documents, and information display.
Lists necessary and supplementary documentation for product use and understanding.
Explains standardized safety instructions, symbols, terms, and abbreviations used.
Guidance on understanding and applying safety instructions and symbols.
Key to symbols used in the documentation to aid understanding.
Defines the proper application and purpose of the Hägglunds CB motor.
Describes uses considered improper and impermissible for the motor.
Specifies the required qualifications and knowledge for personnel handling the product.
General safety rules and regulations for operating and handling Bosch Rexroth products.
Specific safety warnings and precautions related to the Hägglunds CB motor.
Guidelines on the use and responsibility for Personal Protective Equipment.
Details the performance capabilities of the Hägglunds CB radial piston motor.
Describes the mechanical construction and working principle of the Hägglunds CB motor.
Explains how to identify the product using its nameplate and serial number.
Covers procedures and precautions for safely transporting the Hägglunds CB motor.
Provides instructions and safety warnings for lifting and handling the motor using appropriate devices.
Illustrates methods for lifting motors and associated accessories safely.
Details requirements and recommendations for storing the motor, including environmental conditions.
Specifies safe methods for standing the motor on a flat surface to prevent falls.
Guidelines for storing the motor for long durations or in non-controlled environments.
Instructions for storing the motor during maintenance periods to prevent rust.
Instructions for safely unpacking the Hägglunds CB motor and checking for damage.
Specifies conditions and design recommendations for driven shaft ends for installation.
Lists the necessary tools, including special assembly tools, for installation.
Details the use of an assembly tool for mounting the coupling adapter.
Describes the special assembly tool used for mounting the CB motor.
Covers the general procedures for installing the motor and its accessories.
Step-by-step guide for attaching the torque arm to the motor.
Instructions for installing single-ended torque arms on the motor.
Instructions for installing double-ended torque arms on the motor.
Procedures for mounting the motor using shrink disc to adapter or coupling.
Explains how to drain and vent the motor case for horizontal and vertical mounting.
Details the process of flushing the motor case to prevent overheating and ensure longevity.
Diagrams and descriptions of hydraulic connection ports on the motor.
Explains how to determine and achieve the correct direction of motor shaft rotation.
Steps and checks required before starting the motor for the first time.
Procedure for filling the motor case with hydraulic fluid.
Instructions for initial start-up and monitoring of the hydraulic supply.
Procedures for recommissioning the motor after a period of inactivity.
Guidelines for cleaning and maintaining the external surfaces of the hydraulic motor.
General information on performing regular inspections of the motor and system.
Procedures and importance of oil sampling for checking hydraulic fluid condition.
Periodic maintenance schedule and required operations for the hydraulic system.
Schedule and procedures for changing hydraulic system filters.
Procedures for oil analysis, viscosity checks, and managing oxidation and contamination.
Lists tools needed for motor removal and replacement, beyond standard equipment.
Pre-removal steps, including system decommissioning and depressurization.
Detailed instructions for safely removing the motor and coupling adapter.
Steps for preparing removed motor components for storage or reuse.
Procedures for the environmentally sound disposal of motor components and fluids.
Presents technical specifications and data for the Hägglunds CB motor.
Information on selecting and filtering appropriate hydraulic fluids for optimal motor performance.
To Next Page
General