Bosch Hagglunds CB - Removing Motor and Coupling Adapter

Removal and replacement 61/68
RE 15302-WA/05.2019, Hägglunds CB, Installation and maintenance manual , Bosch Rexroth Mellansel AB
11.3 Removing motor and coupling adapter
DANGER
Danger from suspended loads!
Danger to life or risk of injury, damage to equipment!
Improper transportation may cause the Hägglunds motors to fall down leading to
injuries e.g. crushing or broken bones or damage to the product.
▶ Make certain that the forklift truck or lifting device has adequate lifting capacity.
▶ Never stand under or put your hands under suspended loads.
▶ Ensure your position is stable during transportation.
▶ Use PPE (e.g. safety glasses, safety gloves, suitable working clothes, safety
shoes).
▶ Use suitable lifting device for transport and storage, installation and for removal
and repair. Make sure the motor is well mounted or anchored when the lifting
device is disconnected.
▶ Observe the prescribed position of the lifting strap.
▶ Observe the local federal laws and regulations on work and health protection
and transportation.
CAUTION
Contact with hydraulic uid!
Hazard to health/health impairment e.g. eye injuries, skin damage, toxication during
inhalation!
▶ Avoid contact with hydraulic uids.
▶ When working with hydraulic uids, strictly observe the safety instructions
provided by the lubricant manufacturer.
▶ Use PPE (e.g. safety glasses, safety gloves, suitable working clothes, safety
shoes).
▶ If hydraulic uid should, inadvertently comes into contact with your eyes or
bloodstream or is swallowed, consult the medical care immediately.
NOTICE
Escaping or spilling hydraulic uid!
Environmental pollution and contamination of the ground water!
▶ Always place a drip tray under the Hägglunds motor when lling and draining the
hydraulic uid.
▶ Use an oil binding agent if hydraulic uid is spilled.
▶ Observe the information in the safety data sheet for the hydraulic uid and the
specications provided by the system manufacturer.