Bosch Hagglunds CB - Assembly Tool for CB Motor

24/68 Installation
Bosch Rexroth Mellansel AB, Installation and maintenance manual , Hägglunds CB, RE 15302-WA/05.2019
Fig. 13: Mounting CB motor with assembly tool
DD00100406
7.3.2 Assembly tool for CB motor
For easier and faster mounting of the motor on the coupling adapter or driven shaft,
a special assembly tool can be used. The assembly tool is passed through the motor
and screwed into a pre made thread in the coupling adapter or driven shaft. The
motor is pulled onto the shaft by turning the nut on the assembly tool.
Material ID Assembly tool for CB motor:
Material ID R939003803
1
Coupling adapter
or driven shaft with
spline or plain shaft
2
Assembly tool
3
4
Assembly tool motor
1 Tie rod
2 O-ring
3 Washer
4 Nut