Bosch ACS 663 - 6.8 Incomplete charge

SP00D00616 2019-11-08| Robert Bosch GmbH
64 | ACS 663 | Instructions for useen
23. At the end the ACS 663 displays a screen with the
charge result report.
i Select to print the overview.
Select
to return to the Main Menu.
6.8 Incomplete charge
The "stall charge" message appears automatically
after the station has performed 3 attempts of forced
charging with negative result. When the message
appears:
1. Make sure that the connections are firm and that the
quick connectors are properly connected.
2. Select
to repeat 3 forced charging cycles or
select
to use the A/C system of the vehicle to
end the charging, following carefully the following
procedure:
$ Close the valve of the high pressure hose
connection turning the ring nut counterclockwise
and confirm with .
$ Turn on the vehicle and the A/C system on the
vehicle.
$ Select to continue.
$ Close the valve of the low pressure hose
connection turning the ring nut counterclockwise
and confirm with .
$ Turn off the A/C system and the vehicle.
$ Select to continue.
$ Disconnect the service hoses from the vehicle A/C
system.
" The charge is terminated.
6.9 Database
6.9.1 Vehicle database
Specific data on the filling amount of vehicle submitted
to maintenance operations can be recalled directly from
the R1234yf database.
i In this menu it is possible to select the vehicles in
the vehicle database with all relevant data.
1. Call up the Main Menu.
2. Select .
3. Select
.
4. Select European Database.
5. Follow the instructions on the display to obtain the
data related to the vehicle.
" The vehicle is selected.
i Use the Up or Down arrow buttons to change the
displayed item and select
to confirm.
! Refer to the station on-line guide with for
information on how to use it.
6.9.2 Personal vehicle database
It is possible to create a personal database where to
directly enter data for new vehicles that are not in the
standard database.
i Five rows (brand, model, type, oil and refrigerant)
are available for entering new vehicle data.
1. Call up the Main Menu.
2. Select
.
3. Select .
4. Select Personal Database.
5. Select among:
$ Select the vehicle
$ Enter new vehicle
$ Clear vehicle
6. Follow the instructions on the display.
i Use the Up or Down arrow buttons to move to the
next or previous input field and select
to save
the data entry.
! Refer to the station on-line guide with for
information on how to use it.