SP00D00616 2019-11-08| Robert Bosch GmbH
Maintenance | ACS 663 | 75 en
7.12 Print header change
To change the text that appears on this screen:
1. Call up the Main Menu.
2. Select
.
3. Select
.
4. Select Settings.
5. Select Edit Print Header.
The cursor is in the first field.
6. Update the text using the arrow buttons and the
multi-touch interface on the numeric keypad:
The button acts as a backspace key.
The Right or Left arrows button moves the cursor
to the right or left.
The Zero (0) key also acts as a space bar.
To navigate within the rows, use the Up and
Down arrow keys.
7. Select to save the changes and return to the
Settings Menu.
8. Select
to exit and return to the Settings Menu.
7.13 Replacing the printer paper
(only for variants with printer)
To install a new roll of paper in the printer:
1. Remove the printer cover pulling out the tab.
2. Remove the paper support.
3. Install the new roll of paper with the roll end at the
top.
4. Close the cover so that the upper edge of the paper
comes out.
1
2
Fig. 25: Replacing the printer paper
1 Upper edge of paper above the roll
2 Tab
To Next Page
Loading...
