English–34
0 276 001 USAen | (17.6.15) Bosch eBike Systems
PowerPack
656 Software version error Contact your Bosch eBike dealer so that he can perform a software
update.
7xx Transmission error Please observe the operating instructions provided by the trans-
mission manufacturer.
No
display
Internal error in the on-board computer Restart your eBike system by switching it off and back on.
Code Cause Corrective Action
Cause Corrective Action
Two LEDs of the battery pack flashing
Battery pack defective Contact an authorized bicycle dealer.
Three LEDs of the battery pack flashing
Battery pack too warm or too cold Disconnect the battery from the charger until the charging
temperature range has been reached.
Do not connect the battery pack to the charger until it has reached
the permissible charging temperature.
No LED flashes (one or more LEDs light up continuously
depending on the charging state of the eBike battery pack).
The charger is not charging. Contact an authorized bicycle dealer.
No charging procedure possible (no indication on the battery pack)
Plug not inserted correctly Check all plug connections
Contacts of battery pack dirty Carefully clean the contacts on the battery pack.
Socket outlet, cable or charger defective Check household voltage; have charger checked through bicycle
dealer
Battery pack defective Contact an authorized bicycle dealer.
To Next Page
Loading...
Need help?
General
