English – 26
Connecting the on-board computer to the portal
The on-board computer can be connected to the portal via a Wi-Fi connec-
tion.
Note: The on-board computer does not support the use of router chan-
nels12 and 13. If your router is fixed to channel 12 or 13, these channels
are not displayed in the list of available networks on the on-board computer.
If necessary, adjust the settings on your router accordingly in order to con-
nect the on-board computer to your network.
To do this, proceed as follows:
– Press<Login> on the<Status Screen>.
– Select<WiFi>.
– Select a network.
– Enter your username and password.
Once a connection has been successfully established, all data that you have
shared on your profile in the portal will be synchronized with the on-board
computer.
Connecting the On-Board Computer with the BoscheBikeConnect App
Follow these steps to establish a connection to your smartphone:
– Load the app.
– Select the tab <My eBike>.
– Select <Add new eBike device>.
– Add Nyon (BUI350).
The app will then display an instruction to press and hold the bike lighting
button(1) on the on-board computer for 5seconds.
Press and hold the button(1) for at least 5seconds. The on-board computer
automatically activates the Bluetooth®Low Energy connection and switches
to pairing mode.
Follow the instructions on the screen. Once pairing is complete, the user
data is synchronized.
Note: The Bluetooth® connection does not need to be activated manually.
Setting the assistance level
On the operating unit(16), you can set the level of assistance you want the
eBike drive to provide you with while pedaling. The assistance level can be
changed at any time, even while cycling.
Bosch eBike Systems 1 270 U20 Nen | (02.10.2020)
To Next Page
Loading...
Need help?
General
