Need help?Do you have a question about the Bosch AdvancedAquatak 140 and is the answer not in the manual?
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Voltage must match, use RCD/C16 breaker, ensure socket protection.
Explains hazard symbols, water jet warnings, and water supply requirements.
Use IP55/IPX2 plugs/sockets, seal cable entries, protect cables from heat and oil.
Comply with water supply rules, use sealed joints, 1/2" reinforced hose, and back flow valve.
Warnings on extension cables, RCD usage, starting procedures, and autostop function.
Identifies problems like motor not starting, stopping, or fuses blowing with solutions.
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Voltage must match, use RCD/C16 breaker, ensure socket protection.
Explains hazard symbols, water jet warnings, and water supply requirements.
Use IP55/IPX2 plugs/sockets, seal cable entries, protect cables from heat and oil.
Comply with water supply rules, use sealed joints, 1/2" reinforced hose, and back flow valve.
Warnings on extension cables, RCD usage, starting procedures, and autostop function.
Identifies problems like motor not starting, stopping, or fuses blowing with solutions.
General| Form factor | Upright |
|---|---|
| Hose length | 8 m |
| Cable length | 5 m |
| Power source | Electric |
| Castor wheels | Yes |
| Product color | Black, Green |
| Pressure range | High-pressure |
| Power consumption (typical) | 2100 W |
| Maximum flow rate | 450 l/h |
| Sound power level | 91 dB |
| Vibration emission | 0.5 m/s² |
| Sound pressure level | 79 dB |
| Working pressure (max) | 140 bar |
| Maximum water temperature | 40 °C |
| Car wash brush | - |
Weight and Dimensions| Weight | 17550 g |
|---|
To Next Page