EasyManua.ls Logo

Bosch AUTODOME 4000 - Technical Specifications; Camera Specifications; Mechanical Specifications; Electrical Specifications

Bosch AUTODOME 4000
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical specifications
Technical specifications
Camera
Imager 1/4" Double Scan Super HAD CCD II
Lens size fW=3.49 ±0.17 mm fT=104.02 ±5.20 mm
(30x +/- 10% Optical Zoom)
Effective Pixels PAL: 976 (H) x 582 (V)
NTSC: 976 (H) x 494 (V)
Horizontal Resolution 720 TVL (NTSC, PAL)
Optical Zoom 30x Effective Optical Zoom
Digital Zoom 10x
Field of View (approxi-
mate)
2.46° (TELE) to 69.5° (Wide)
Focus Automatic with manual override
Signal-to-Noise Ratio
(SNR)
>50 dB
White Balance Auto, indoor, outdoor, one push
Minimum Illumination 0.2 Lux/ F1.65
0.001 Lux/DSS
0.1 Lux/ICR
Iris Control Auto
Wide Dynamic Range
(WDR)
On/Off
Dynamic Noise Reduc-
tion (DNR)
3DNR
Privacy 15 zones maximum
Mechanical
Weight 1.5 kg (3.3 lb)
Pan Range 360° continuous
Tilt Range 0° to 180° (90° when 3D Privacy Masking is enabled)
Flip Rotate 180° at bottom of tilt
Auto Scan 8 Auto Scan modes including vector scan
Pre-position Speed 360°/s
Preset Positions 99 (Bosch OSRD);
210 (Pelco P/D) positions with camera status
Tours 8 Tours (Preset, Pattern, Scan)
Patterns 8 Patterns
On-Screen Display
(OSD)
Camera ID, Title, Mode, and Angle (multi-language)
Multi-language OSD English, Chinese, Dutch, French, German, Italian,
Russian, Spanish
Electrical
Power Supply 24 VAC ± 10%, 50/60 Hz
Built-in power line surge
Power Requirements 24 VAC adapter, 1 A (2.5 A with heater)
Power Consumption 24 VAC, 850 mA / 20 W (without heater)
24 VAC, 2A / 45 W (with heater)
Alarm Input 4 normal dry contacts (selectable NC/NO)
Alarm Output 1 normal relay 5 VDC / 40 mA maximum (selectable
NC/NO)
Control RS-485; baud rate: 2400-38.4 Kbps (default =
9600 bps)
Access Time 0.75 second maximum preset recall time
Camera Address (ID) Physical - 99
Environmental
Ingress Protection Rat-
ing
IP66
External Mechanical Im-
pact
(IK Code or Impact rat-
ing)
IK10
Operating Temperature -40 °C to +50 °C (-40 °F to +122 °F)
Heater works automatically from -40 °C/°F to +10 °C
(+50 °F)
Heater thermostat On/Off at 0 °C to 10 °C (32 °F to 50 °F)
Installation Humidity 80% relative humidity (RH)
Storage Temperature -20 °C to +60 °C (-4 °F to +140 °F)
Communications
Camera Setup/Control RS-485; Bosch Biphase with converter (sold sepa-
rately)
Communications Proto-
cols
Bosch (OSRD), Pelco P/D;
(Bosch Biphase to OSRD protocol converter, sold
separately)
Construction
Housing Material Cast aluminum
Color White or Charcoal
Size (Diameter x Height) Ø154 x 138 mm (H)
(Ø 6.06 x 5.43 in.)
Bubble Ø112 mm (Ø 4.41 in.)Polycarbonate; clear or tinted
Certifications and approvals
Region Certification
Europe CE
USA UL
FCC
Australia CTICK
Installation/configuration notes
Ø112
(4.41)
Ø151.3
(5.96)
Ø154
(6.06)
26
(1.02)
79
(3.11)
138
(5.43)
mm
(in.)
Dimensions, Camera Side
4-Ø4.8
85.6
85.6
Dimensions, Camera Bottom
2 | AUTODOME 4000

Related product manuals