NPD-6001A High PoE Midspan 60W, single port, AC in
High Power, 60 W Single Port PoE Midspan with AC in
Order number NPD-6001A
VG4-A-PA0 Pendant Arm Mount
Pendant arm mount with power supply box for a
AutoDome Series cameras, no transformer, white
Order number VG4-A-PA0
VG4-A-PA1 Pendant Arm Mount with 120 VAC Trans-
former
Pendant arm mount with power supply box for
AutoDome Series cameras with a 120 VAC
transformer, white
Order number VG4-A-PA1
VG4-A-PA2 Pendant Arm Mount with 230 VAC Trans-
former
Pendant arm mount with power supply box for
AutoDome Series cameras with a 230 VAC
transformer, white
Order number VG4-A-PA2
VGA-PEND-ARM Pendant Arm with Wiring
Compatible with an AutoDome Series pendant housing
Order number VGA-PEND-ARM
VGA-PEND-WPLATE Mounting Plate
Mounting plate for VGA-PEND-ARM, compatible with
an AutoDome Series camera
Order number VGA-PEND-WPLATE
VGA-ROOF-MOUNT Roof Mount
Roof parapet mount, white
(VG4-A-9543 Pipe Mount Cap required. Available
separately.)
Order number VGA-ROOF-MOUNT
LTC 9230/01 Flat Roof Mount Adapter
For mounting a unit in an upright position on a flat
surface for roof parapet mount VGA-ROOF-MOUNT
Order number LTC 9230/01
VG4-A-9541 Pole Mount Adapter
Pole mount adapter for a for an AutoDome Series
pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager, designed for poles with a diameter of
100‑380 mm (4‑15 in.), white
Order number VG4-A-9541
VG4-A-9542 Corner Mount Adapter
Corner mount adapter for an AutoDome Series
pendant arm or a VEI-30 or NEI-30 Dinion Infrared
Imager
Order number VG4-A-9542
VG4-A-9543 Pipe Mount
Pipe mount, white, for an AutoDome Series pendant
housing
Order number VG4-A-9543
VGA-IC-SP In-ceiling Support Kit for Various Bosch
Dome Cameras
Suspended ceiling support kit for various families of
Bosch dome cameras
Order number VGA-IC-SP
VGA-SBOX-COVER Cover for AutoDome Power Supply
Boxes
Order number VGA-SBOX-COVER
VG4-A-TSKIRT Trim Skirt for AutoDome Power Supply
Boxes
Trim skirt for the following AutoDome Series power
supply boxes:
VG4-A-PSU0, VG4-A-PSU1, and VG4-A-PSU2
Order number VG4-A-TSKIRT
VGA-BUBBLE-CCLR Clear Rugged Bubble for an In-ceil-
ing Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-CCLR
VGA-BUBBLE-CTIR Tinted Rugged Bubble for an In-ceil-
ing Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-CTIR
VGA-BUBBLE-CCLA Clear High-resolution Bubble for an
In-ceiling Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-CCLA
VGA-BUBBLE-CTIA Tinted High-resolution Bubble for an
In-ceiling Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-CTIA
VGA-BUBBLE-PCLR Clear Rugged Bubble for a Pendant
Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-PCLR
VGA-BUBBLE-PTIR Tinted Rugged Bubble for a Pendant
Housing
Impact resistant polycarbonate bubble
Order number VGA-BUBBLE-PTIR
VGA-BUBBLE-PCLA Clear High-resolution Bubble for a
Pendant Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-PCLA
VGA-BUBBLE-PTIA Tinted High-resolution Bubble for a
Pendant Housing
Low-impact acrylic bubble
Order number VGA-BUBBLE-PTIA
VGA-BUBHD-CCLA Clear HD High-Resolution Acrylic
Bubble for In-Ceiling AUTODOME cameras
Order number VGA-BUBHD-CCLA
10 | AUTODOME 7000 IP
To Next Page
Loading...
