What to do if my Bosch B25L TDS25PRO1 Iron boiler is leaking water?
If your Bosch Iron boiler is leaking water, the drainage plug at the bottom of the appliance may be loose. Tighten the boiler drainage plug using a coin.
Why does the Calc'n clean light keep coming on my Bosch B25L TDS25PRO1 Iron?
The Calc'n Clean light illuminates continuously because the boiler needs rinsing. To resolve this, rinse the boiler following the instructions, then switch the station off twice, leaving it off for at least 30 seconds each time.
What to do if the pressure gauge on my Bosch Iron reaches the red area frequently?
If the pressure gauge on your Bosch Iron frequently reaches the red area, it indicates high pressure inside the boiler. Switch the station off, and have it checked by a technical service center.
Use steam gun to refresh garments, lessen creases and wrinkles.
Use steam gun to remove washable, fresh stains from textiles.
Rinse the boiler regularly to prevent scale buildup and ensure optimal function.
General| Steam pressure | 5.5 bar |
|---|---|
| Vertical steam | Yes |
| Calc clean system | Yes |
| Auto shut-off | Yes |
| Anti-drip system | Yes |
| Anti-calc system | Yes |
To Next Page