25.3 Send Status Report
The Send Status Report feature sends a complete system status
report to your security monitoring company. Status reports can
alert them to potential problems.
Sending a status report:
1. Open the Main menu.
2. Use [NEXT] to go to the Status menu option, and press
[ENTER], or simply press [2].
3. Use [NEXT] to go to the Send Status Report menu option,
and press [ENTER], or simply press [3].
4. Enter your passcode and press [ENTER]. The control panel
sends a status report to your security company.
Control Panels B92x/B91x Status menu | en 151
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
