Bosch B3512 - Deleting a User from the System

27.3 Edit User
Use the Edit User function to edit a user of your security system.
You need to know the user number for the user you want to edit.
Editing an existing user:
1. Open the Main menu.
2. Use [NEXT] to go the Users menu option, and press [ENTER],
or simply press [4].
3. Use [NEXT] to go to the Edit User menu option, and press
[ENTER], or simply press [3].
4. Enter your passcode and press [ENTER].
5. Enter the number (1 – 50) for the user you wish to edit, and
press [ENTER].
6. The keypad shows the name for the user number you entered.
Press [ENTER].
Configuring the user’s passcode:
1. Press [1] or [ENTER] to open the Configure Passcode menu.
2. Press [ENTER] to configure the user’s passcode.
3. Enter the user’s passcode and press [ENTER].
4. Enter the passcode again and press [ENTER]. The keypad
shows Passcode changed and then returns to the previous
menu.
Configuring the user’s name:
1. Use [NEXT] to go to the Configure Name option, and press
[ENTER], or simply press [2].
Control Panels
B92x/B91x Users menu | en 181
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371