Bosch B3512 - Page 162

26.4.2 Network Originate
Use this function to originate an RPS session using an internet
connection.
Connecting to RPS using an internet connection:
1. Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and press
[ENTER], or simply press [3].
3. Use [NEXT] to go to the RPS menu option, and press
[ENTER], or simply press [4].
4. Use [NEXT] to go to the Network Originate menu option, and
press [ENTER], or simply press [2].
5. Enter your passcode and press [ENTER].
6. To use the programmed port number, press [1] or press
[ENTER]. The connection progress begins.
7. If you wish to change the port number before connecting,
press [NEXT] and then [ENTER], or simply press [2]. The
[ESC] key acts as a backspace key. Press [ESC] to delete the
characters, and then enter the new characters. Press
[ENTER]. The connection process begins.
162 en | B92x/B91x Actions menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.