Enabling a disabled SKED:
1. With the SKED you wish to enable showing, press [ENTER].
2. Press [ENTER] to continue.
3. Enter the new time in HH:MM format. If you make a mistake
the [ESC] key acts as a backspace key. Press [ESC] to delete
the characters and then enter the new numbers.
4. Press [ENTER] to save the time and choose AM or PM.
5. Press [ENTER] to select AM, or press [NEXT] and then
[ENTER] to select PM. The keypad shows Schedule update
complete and then returns to the previous menu.
6. Press [ESC] to exit the menu.
Disabling an enabled SKED:
1. With the SKED you wish to enable showing, press [ENTER].
2. Press [ENTER].to continue disable it. The keypad display
indicates that the SKED is disabled.
3. Press [ESC] to exit the menu.
192 en | B92x/B91x Settings menu Control Panels
2015.01 | 02 | F.01U.307.371 Bosch Security Systems, Inc.
To Next Page
Loading...
