174
en | B92x/B91x Users menu Control Panels
2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
Configuring the user’s name:
1. Use NEXT to go to the Configure Name option, and press ENTER, or
simply press [2].
2. Press ENTER to configure the user’s name.
3. The ESC key acts as a backspace key. Press ESC to delete the
characters. Press a number key repeatedly to scroll through the
number and letters shown on the key. To enter a space, press [0]
[0]. To enter a space, press [0][0]. To capitalize a letter, press CMD
before you enter the letter. For caps lock, press CMDCMD. To
remove caps lock, press CMDCMDCMD.
4. Press ENTER to save the new name. The keypad returns to the
previous menu.
Configuring the user’s level:
1. Use NEXT to go to the Configure Level option, and press ENTER, or
simply press [3].
2. Press ENTER to change the default authority level for area 1.
3. Enter the authority level number (1 - 14) you wish to apply to the
user and press ENTER. The keypad shows Level configured and
returns to the previous menu.
4. If your security system has more than one area, use NEXT and the
previous two steps to set the levels for the additional areas.
To Next Page
Loading...
