186
en | B92x/B91x Settings menu Control Panels
2019.06 | 07 | F.01U.307.371 Bosch Security Systems B.V.
28.3 Schedule (SKEDs)
A SKED is a function programmed to be performed automatically at a
scheduled time by your security system. You can change the scheduled
time for SKEDs, disable a SKED to prevent it from automatically
happening, or restart a previously disabled SKED. Contact your security
company to determine what SKEDs they programmed for your system.
Selecting a SKED to change:
1. Open the Main Menu.
2. Use NEXT to go to the Settings menu option, and press ENTER, or
simply press [5].
3. Use NEXT to go to the Schedule menu option, and ENTER, or
simply press [3].
4. Enter your passcode and press ENTER.
5. Use PREV or NEXT to scroll through the list of SKEDs. The keypad
indicates whether a SKED is enabled, disabled, or not yet
programmed.
6. With the SKED you wish to enable showing, press ENTER.
7. Continue to Enabling a disabled SKED or Disabling a enabled SKED.
To Next Page
Loading...
