18.3 Schedule (SKEDs)
A SKED is a function programmed to be performed automatically
at a scheduled time by your security system. You can change the
scheduled time for SKEDs, disable a SKED to prevent it from
automatically happening, or restart a previously disabled SKED.
Contact your security company to determine what SKEDs they
programmed for your system.
Selecting a SKED to change:
1. Open the Main menu.
2. Press [Settings] to open the menu.
3. Press [Schedule] to open the menu.
4. Enter your passcode and press [ENTER].
5. Use
/[PREV] or /[NEXT] to scroll through the list of
SKEDs. The keypad indicates whether a SKED is enabled,
disabled, or not yet programmed.
6. Continue to Enabling a disabled SKED or Disabling a enabled
SKED.
Control Panels B94x/B93x Settings menu | en 107
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
