17.2 Add User
Use the Add User function to add a passcode to your security
system. Before you add the user, you need to know which user
numbers are available, the authority level you want to assign to
the new passcode, and the areas in which it will be valid.
The user numbers identify users in reports transmitted from your
security system. The authority level determines what system
functions the passcode can access. The area number identifies
which parts of your security system the passcode can access.
Contact your security company if you don’t know what user
numbers, authority levels, or areas are available.
Control Panels B94x/B93x Users menu | en 93
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
