14.5.2 Unbypass Points
Unbypassing a point returns a bypassed point to the security
system so that it can once again respond to trouble and alarm
conditions.
Unbypassing a point:
1. Open the Main menu.
2. Press [On/Off] to open the menu.
3. Press [Bypass] to open the menu.
4. Press [Unbypass Points] to open the menu.
5. Select a point to unbypass.
6. Escape from the menu.
Control Panels B94x/B93x On/Off menu | en 67
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371
To Next Page
Loading...
