Bosch B9512G - Page 95

Adding a user:
1. Open the Main menu.
2. Press [Users].
3. Press [Add User] to open the menu.
4. Enter your passcode and press [ENTER].
5. Enter the number (1 – 50) for the user you wish to add, and
press [ENTER].
Configuring the user’s passcode:
1. Press [Passcode] to set the passcode.
2. Press [ENTER] to continue.
3. Enter the user’s passcode and press [ENTER].
4. Enter the passcode again and press [ENTER]. The keypad
shows Passcode changed and then returns to the previous
menu.
Configuring the user’s name:
1. Press [Name] to configure the user’s name.
2. The B94x offers a qwerty keyboard. For a B93x, press a
number key repeatedly to scroll through the number and
letters shown on the key. To enter a space, press [0][0]. To
capitalize a letter, press [CMD] before you enter the letter.
For caps lock, press [CMD][CMD]. To remove caps lock,
press [CMD][CMD][CMD].
3. Press [ENTER] to save the name. The keypad returns to the
previous menu.
Control Panels
B94x/B93x Users menu | en 95
Bosch Security Systems, Inc. 2015.01 | 02 | F.01U.307.371